371b0523d5

 



DIN-LED 4PX

 

4 channel constant voltage LED driver with DMX/RDM input

 

Each channel can control up to 1A @ 24V (supplied by external power

supply). Dimming is performed with a 500Hz PWM signal, and 8 bit

resolution. There are 2 automode programs with adjustable speeds

that cycle through colours when RGB leds are connected to the outputs.

DMX address or Automode is set using any standard RDM controller.

 

Specifications:

¤  4 LED ports on 10 way screw connectors

¤  1 input DMX on 3 way screw connector

¤  Status LED

¤  Each channel has auto reset 1A over current protection

¤  Standard 4 module wide din-rail enclosure

¤  Operating 0 >50 ambient

 Datablad...

 

 

4 på lager
960,00 ekskl. mva

 



The DIN-LED4 350X

 

4 channel constant current 350mA LED driver with DMX/RDM input

 

Each channel can control up to seven 1Watt leds in series. Dimming is

performed with a 500Hz PWM signal, and 8 bit resolution. There are 2

automode programs with adjustable speeds that cycle through colours

when RGB leds are connected to the outputs. DMX address or Automode

is set using any standard RDM controller.

 

Specifications:

¤  4 LED ports on 10 way screw connectors

¤  1 input DMX on 3 way screw connector

¤  Status LED

¤  Standard 4 module wide din-rail enclosure

¤  Operating 0 >50 ambient

 

 

1 Stk på lager
1 070,00 ekskl. mva

 



The DIN-LED4 700X

 

4 channel constant current 700mA LED driver with DMX/RDM input

 

Each channel can control up to seven 2 Watt leds in series. Dimming is

performed with a 500Hz PWM signal, and 8 bit resolution. There are 2

automode programs with adjustable speeds that cycle through colours

when RGB leds are connected to the outputs. DMX address or Automode

is set using any standard RDM controller.

 

Specifications:

¤  4 LED ports on 10 way screw connectors

¤  1 input DMX on 3 way screw connector

¤  Status LED

¤  Standard 4 module wide din-rail enclosure

¤  Operating 0 >50 ambient


 
1 Stk på lager
1 270,00 ekskl. mva

 



The DIN-LED4 1000X

 

4 channel constant current 1000mA LED driver with DMX/RDM input

 

Each channel can control up to seven 3 Watt leds in series. Dimming is

performed with a 500Hz PWM signal, and 8 bit resolution. There are 2

automode programs with adjustable speeds that cycle through colours

when RGB leds are connected to the outputs. DMX address or Automode

is set using any standard RDM controller.

 

Specifications:

¤  4 LED ports on 10 way screw connectors

¤  1 input DMX on 3 way screw connector

¤  Status LED

¤  Standard 4 module wide din-rail enclosure

¤  Operating 0 >50 ambient


 
1 Stk på lager
1 370,00 ekskl. mva

 



Drive your LED tape/strip with the CV driver. A Powerful 250W power supply and driver in one allows you drive up to 25 meters of 24V LED strip from a single unit without needing extra wiring.

  • All in one driver (Power Supply & Dimmer)
  • Simple 120-240V AC input
  • DMX512 Controllable and RDM Configurable
  • Compatible with all 24V strips: White, CTA, RGB, RGBW
  • Smallest size only 42mm wide
  • Advanced heat management
  • Isolated DMX input
  • 5 Amps per channel output
  • 250 watts total output power
  • Fused outputs
  • Power and status LEDs
  • Standard 19" rack mount unit using 8 Way mounting rack PN:73530

RDM

The ALEPH1 CV DRIVER has full RDM capabilities, that means you can configure the driver remotely and softpatch channels to any address you need. 
The ENTTEC RDM Controller software can be downloaded for free from ENTTEC website and be used in combination with a USB PRO, RDM USB PRO or a PRO MK2 DMX widget. 




 
bestillingsvare
3 720,00 ekskl. mva

XLR 4PIN TO SCREW TERMINAL OUTPUT CONVERTER 

Passer til ENT-C0650

1 Stk på lager
140,00 ekskl. mva